Kit
Haven’t installed yet. Product looks as advertised.
Item: S14692
This complete service kit includes everything needed to keep your Jabsco Ballast Puppy Pump properly working.
Included:
This green impeller (Jabsco part #:6303-0107) is the latest generation wakeboard ballast impeller from Jabsco, designed specifically for use in all Jabsco 18220 Ballast Puppy pumps powering automated wakeboard ballast system. This is the OEM impeller for MasterCraft, Correct Craft (Air Nautique), Supra, Moomba, Yamaha, and Centurion and others.
This item is the replacement impeller with service kit. If you're looking for the replacement impeller only, you can get the standalone Jabsco Ballast Puppy Premium Impeller.
If you've been having problems with your system draining or filling correctly, or if water is leaking into or out of the tanks or bags while the pumps are turned off, replacing your existing impeller with a new green compound impeller will solve all of your problems. The green compound impeller is also a replacement for the now discontinued black and yellow compound impellers, so if you're replacing one of those older impellers, this is the part you want.
Impellers are a wear item, so over time, the efficiency of the pump will be reduced as the compound of the impeller breaks down. That means your wakeboard ballast system will take longer to fill and drain than it did when newer. Replacing a damaged or worn out impeller will restore the speed and functionality of your Jabsco Ballast Puppy pump to like new condition. If you have an original Jabsco Ballast Puppy with a black rubber or yellow neoprene impeller this is a great upgrade you can make to increase the speed and functionality of your system.
If you've installed additional bags on top of your factory hard tank ballast system (as is popular in Mastercraft and Nautique wakeboard boats) then this upgrade is essential in order to ensure that both the tank and bag will fill completely, and stay full while wakesurfing and wakeboarding.
MasterCraft Jabsco Ballast Puppy Pump Impeller Replacement Instructions:
Step 1: Remove two of the front cover screws. (Note: Retain the screws for the reinstallation process) Swing the cover up and out of the way to allow access to the impeller location. the impeller may be black, yellow or green depending on the age of the pump.
Step 2: Using needle-nose pliers, pull the old impeller out of the casing.
Step 3: Install the new impeller. (It is intentionally larger than the case. While gently squeezing it in, ensure that the paddle wheels angle in the same direction--counterclockwise--all the way around.)
Step 4: Slide the plate back into place. NO SEALANT IS NECESSARY due to the built-in gasket, tightening the screws should prevent leakage.
Impeller Part # Cross References
This part is a direct replacement for any Jabsco impeller part number that begins with 6303, including: 6303-0007, 6303-0023, 6303-0001, 63003 0003, 6303 0003, 6303 0023 and 6303-003
Pump Part # Cross References
This part is a direct replacement for the impeller in any Jabsco Ballast Puppy pump that begins with 18220, including: 18220-1123, 18670-0123 and 18670-6127
This is the exact same impeller that comes in every Jabsco Ballast Puppy pump from the factory regardless of the boat brand. 6303-0007-P and 6303-0107 are the same part number, the P just denotes that this is an individual pack (which includes the lubricant and o-ring) versus a bulk pack option.
NOTE: The Jabsco Green Ballast Impeller is also the replacement upgrade impeller for the Johnson Ultra Ballast Reversible Pump. Jabsco Ballast Puppy Impellers have been confirmed compatible with Johnson Ultra Ballast Pumps.
Haven’t installed yet. Product looks as advertised.
I recently purchased the Jabsco Ballast Puppy Impeller Pump Service Kit, and I must say, I'm thoroughly impressed. As a boat owner who relies heavily on a functioning ballast system for wake surfing, having a reliable pump is paramount. This service kit not only met but exceeded my expectations and provided all the components for an easy winter service of the impeller on my Jabsco pump.
Great product at great price
Thanks Richard!
Great availability
Thanks for the review! Have a great rest of your summer!
Wakemakers is the only place on the internet I can find this full service kit. It's especially nice to have the rear shaft seal and new brass screws. Thanks for providing this kit for just a few bucks more than the impeller!
This product can expose you to chemicals including DINP (Diisononyl phthalate) and DIDP (Diisodecyl phthalate) which are known to the State of California to cause cancer. For more information go to https://www.p65warnings.ca.gov.
We want you to receive the best possible deal on your boating products. We match any authorized dealer's advertised price for the same in-stock item. What does that mean for you? If you find the same product in stock at another authorized retailer we'll gladly match their price delivered price. Don't forget that on top of our free fast shipping (on any order over $99 shipped to the Continental US) we also offer our exclusive lifetime technical support.
If you have any questions about our price match policy, or if you would like us to match a price for you, simply contact us.
Note We have the right to refuse price matching at any time for any reason. In order to qualify for price matching, the item must be identical make, model, year, and part number, and must be in stock. Price matching excludes sale items and previously purchased products.
365 Day Returns Your satisfaction is our biggest priority, which is why we gladly accept returns on any new product for up to 365 days from the date your order ships. Refunds will be issued to the original payment method for up to 30 days from the original ship date. Returns on orders older than 30 days up to 365 days will be processed as store credit that can be applied to a future order.
For the full details of our 365 Return Policy, including any restrictions or exclusions, please visit the Returns & Exchanges section on Customer Service page.
Our product experts bring over 40+ years of real-world experience and knowledge of the boating industry. They really know the gear, because they spend their free time out on the water with friends and family testing the products out.
Product Expert Phone Hours 9am - 5pm (PST) Monday - Friday
Product Expert Email We respond to most emails within 24-48 hours.
Looking for specific installation guides or instructional videos? Check out our Resource Section for detailed information.
WakeMAKERS Online Shopping Tools Our Finder tools are designed to help you pick the perfect product. We've simplified the complex process of finding the right ballast or prop for you boating style and made it easy by doing the research for you.
Our goal is simple; provide the best product, at the best price, with the best customer support.
The last thing you want to do is pay to have your order shipped when shopping online, which is why we include free shipping on all orders over $99*.
*Free shipping offer applies to orders over $99 shipped within the Continental United States and cannot be combined with other discounts or promotions (including coupon codes).